Obsolete Marvin Casemaster [casement] Crank Hardware Parts | 6 1/2", 9 1/2" and 13 1/2" Arm Lengths

$68.88
SKU: RotoGear PI.OX

 

Old Marvin Casemaster [casement] Window Replacement and Repair Hardware. When ordering obsolete and old out of production Marvin [casement] Casemaster parts you can specify: (1) type of unit; (2) part numbers if available; (3) good description OR BETTER YET - SEND SOME PICTURES; (4) year of manufacture (if known); NOTE: Standard hardware (unless noted) will be supplied with Yellow Zinc Dichromate (YZD) coating until stocks are depleted, EGard coated hardware will then be substituted. Squared Design Original and when stocks are depleted we will ship the rounded edge style; Components with “YZD” specified as the color are only available with Yellow Zinc Dichromate (YZD) coating.

 

Single Arm Roto Gear, Special Offset Arm Casements and Casemasters between 1976 − 1982, butt hinge and or radius or polygon shapes until 1990; Originally available in three (3) arm lengths - 6 1/2", 9 1/2" and 13 1/2" ; Customer must specify arm length measured from center of roto−gear to end of the arm; If you need the 6 1/2" , Order the 9 1/2" as replacement part; Comes in right hand or left handing, in 9 1/2" or 13 1/2" arm lengths only. Shipped complete with # PPF-54 crank handle and screws.

 

To Order: Determine arm length [See the "A" Measurement Picture below. Measure from center of gear box to center of roller on arm. Determine left or right hand. View window from outside; if casement hinges are on left side, order a left hand operator; Available in BRONZE, CHESTNUT BRONZE, CLAY, WHITE and GOLD - NOTE: This roto−gear may also be used for replacement on units manufactured between 1968 − 1976

 

Need Parts Help?  Info@TruthWindowHardware.com

 

 

 

Image: 
Price: $68.88